Advertisement
Checking Batteries
Your new safe arrived with 4-AA batteries pre-installed at the factory. It is important
to periodically check the batteries and, if necessary, replace with a new set.
1.
Locate the # key on the keypad and press.
2.
If the amber LED flashes and you hear a beep, the batteries
are good.
3.
If the red LED flashes, change the batteries within two
months.
4.
If the LED does not light, then you must replace the
batteries immediately.
5.
Proceed to Changing and Installing New Batteries.
Changing and Installing New Batteries
Important:
Replacing the batteries will not erase your personal Passcode from memory. However,
weak or dead batteries will prevent the use of the digital key pad. Access to the safe
will have to be made using the Emergency Override
1.
Press firmly in on the dotted arrow on the front of the
battery cover and push downward to open.
2.
Remove the 4 dead batteries and replace with 4 new
Alkaline AA batteries. Make sure that they are installed in
the proper direction.
3.
Replace the cover and open the safe using your personal
Passcode.
NOTE: Proper disposal of discharged batteries is encouraged!
Battery Cover
Home and Office Security Safes
Checking, Changing and
Installing New Batteries
Remove Batteries
Key. (See page 4).
# Symbol
5
Hide quick links:
Advertisement
