Qos Data Export - Cisco Catalyst 2000 Configuration Handbook

246 Cisco LAN Switching Configuration Handbook
Table 13-8 Commands to Display QoS Configuration and Operation Information
Display Function
QoS port information
Port queue scheduling and congestion
avoidance
QoS mapping
Policers
QoS policies
Policy activity on an interface

13-3: QoS Data Export

QoS statistics data can be gathered from sources within a switch and sent to a data
■
collection device.
■ QoS data export is limited to the Catalyst 6000 family.
Statistics data is exported using a specific UDP port or a syslog facility.
■
The sources of QoS data can be one of the following. The data fields shown are sep-
■
arated by a delimiter character when data is exported:
■
■
■
Configuration
Specify how to send QoS statistics.
1.
a. Select a destination for statistic collection:
Switch port: Data export type 1, slot/port, number of ingress packets, ingress
bytes, egress packets, egress bytes, and a time stamp.
Aggregate policer: Data export type 3, policer name, number of in-profile
packets, out-of-profile packets exceeding the CIR, out-of-profile packets exceed-
ing the PIR, and a time stamp.
QoS policy class map: Data export type 4, class map name, port, VLAN, or
port-channel number, number of in-profile packets, out-of-profile packets ex-
ceeding the CIR, out-of-profile packets exceeding the PIR, and a time stamp.
(global) mls qos statistics-export destination {host-name | host-ip-
address}
Command
(exec) show mls qos {type number | port-
channel number | vlan vlan-id]
(exec) show queueing interface {type number |
Null interface-number | vlan vlan-id}
(exec) show mls qos maps
(exec) show mls qos aggregate policer
[aggregate-name]
(exec) show class-map [class-name]
OR
(exec) show policy-map policy-map-name
(exec) show policy-map interface [type num-
ber | null interface-number | Vlan vlan-id]
[input | output]