Cisco Business Edition 7000 Installation Manual page 17

Installation
Figure 15: Edit Virtual Machine Settings to Connect Floppy Drive to Read Configuration Settings from FLP File
e) In the Options tab, choose Advanced Settings > Boot Options and select Force BIOS Setup.
f) When you boot the virtual machine later, select the BIOS Boot menu, and then use the - key to move
Removable Devices down to the bottom of the boot list to ensure that the virtual machine boots from the
DVD drive.
Step 6
To begin installation of each application, follow these steps:
a) Power on the virtual machine, right click and choose Open Console as shown in Figure 13.
b) If you are not using installation answer files, follow the interactive installation procedure in the console.
Use the information that you collected in
c) Installation is complete and successful when you are able to successfully log in from the console.
• For Prime Collaboration, type
complete installation. After that, the installation script asks for network information and various credentials
(passwords for admin, root, globaladmin) information.
• For a VCS or Expressway server, set up the application by logging in using the default username (admin)
and password (TANDBERG). Type y when asked "Run install wizard [n]:" and continue with interactive
installation.
Note
What to Do Next
After installing all required applications, access applications using a web browser. Add licenses and configure
features as required.
setup
If you require detailed installation guidance, see the Installation Guide of the applications on the
Cisco Business Edition 7000 Support Documents website, listed in
Install Applications on Virtual Machines
Step 1, on page 15.
at the "localhost login:" prompt to configure the application and
Cisco Business Edition 7000 Installation Guide, Release 11.6
For More Information section.
17