Mitsubishi Q01CPU User Manual page 75

2
SYSTEM CONFIGURATION
(b) When the redundant power main base unit (Q3 RB) is used
Memory card
Battery for QCPU (Q6BAT)
Q7BAT-SET
Battery holder Battery for QCPU (Q7BAT)
Q8BAT-SET 4
Q8BAT connection cable Battery for QCPU
(Q8BAT)
1
Extension cable
* 1: One memory card can be installed.
Select a memory card from SRAM card, Flash card, and ATA card according to the application
and capacity.
With commercial memory cards, the operation is not assured.
* 2: Use the redundant power supply module for the power supply module.
The redundant power supply module can use the both Q63RP and Q64RP together with one
redundant base unit.
The Q series power supply module and the slim type power supply module are not available for
the power supply module.
* 3: The Q series power supply module is not required for the Q5 B extension base unit.
* 4: When using the Q8BAT-SET for the Universal model QCPU, use the connection cable whose
connector part displays "A".
For details of connector part of a connection cable, refer to Section 7.2.2.
Diagram 2.13 System configuration when Q3 RB is used
2.1.1 System Configuration for Single CPU System
Universal model QCPU
Redundant power supply module/I/O module/Intelligent function module
2.1 System Configuration
2
Q3 RB redundant power main base unit
Q6 RB redundant power extension base unit
Q5 B extension base unit 3
2
- 14
1
2
3
4
2
5
6
7
8