Charging The Freecom - Cardo Systems FREECOM 1 Manual

2. Charging the FREECOM 1

Make sure that your FREECOM 1 battery is fully charged for at least 4 hours before initial use.
To charge the FREECOM 1:
1. Connect the USB cable Type A plug to either the wall charger supplied with your FREECOM 1, or to a computer
USB port.
2. Connect the USB cable Type B plug to the FREECOM 1 USB port.
Charging with the wall charger is faster than via a computer USB port.
Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on. (see
Section 3.2 - Switching Your Unit
During charging, the LED indicates charging status as follows:
● red LED on - charging
● red LED off - charging complete
On/Off).
- 5 -
FREECOM 1 Manual
2. Charging the FREECOM 1