Table of Contents
Advertisement
To jump to the previous track while streaming:
●
To use the headset buttons: tap ~Phone twice.
●
To use SmartSet: on the MUSIC screen, tap the back icon.
To forward scan tracks while streaming:
●
To use the headset buttons: press ~Volume Up for 2 seconds.
●
To use SmartSet: On the MUSIC screen, under MUSIC SCAN, tap the forward scan icon.
To backward scan tracks while streaming:
●
To use SmartSet: on the MUSIC screen, under MUSIC SCAN, tap the backward scan icon.
To stop track scanning:
●
To use the headset buttons: tap ~Phone.
●
To use SmartSet: On the MUSIC screen, under MUSIC SCAN, tap the stop icon.
●
To use VOX: say a word loudly.
5.2.1.1 Switching Music Sources
If two A2DP audio sources are paired, FREECOM 1 uses the A2DP audio sources from which you last played music.
To switch to the other audio source:
1.
Stop A2DP playback from the current device (see " Listening to Music" on the previous page).
2.
Start A2DP streaming from the other device (see " Listening to Music" on the previous page).
FREECOM 1 automatically remembers your last played device.
5.2.2 Audio Source Priorities
FREECOM 1 automatically determines which audio source to play through the speakers based on the following
priority:
Priority
Higher Priority
↑
Lower Priority
Mobile phone 1, GPS device instructions
Mobile phone 2, GPS device instructions
A2DP music
- 17 -
Audio Source
FREECOM 1 Manual
5. On the Road
Hide quick links:
Advertisement
Table of Contents
