Charging The Scala Rider G9 - Cardo Systems G9 User Manual

cONTeNTs OF reTail BOX
NOTE: If you purchased the scala rider G9 PowerSet, your Retail
Box will include two sets of each component listed below.
G9 Audio Kit
Noise canceling Interchangeable
sealed omni flexible boom
microphone (Corded mic also
provided)
scala rider G9 Unit
Flip-up Antenna
Volume Down / Rewind button
Mobile phone button
Volume Up / Forward button
Channel A Button
Voice Command
• Connect to Rider A
Button
• MP3 Button
"One+8" Intercom
IMPORTANT:
The scala rider G9 has been certified as waterproof and dustproof (IP67).
However, when in use, the silicon cover of the charging Jack should
be kept tightly closed to prevent moisture from entering the unit.
| |
scala rider scala rider G9 / G9 PowerSet G9 / G9 PowerSet
® ®
4 4
Two
Sliding
speakers
Panel
MP3 Jack
(back)
Silicone Cover
• Charging
jack
Channel B Button
• Connect to Rider B • Software
download
• FM Radio Button
port
Corded Microphone
Allen wrench
Pre-moistened Towlettes
Alcohol
Pad
MP3 cable
Carry pouch
* The large microphone sponge is recommended for use with open helmets

2. CHARGING THE SCAlA RIDER G9

Make sure that your scala rider G9 is fully charged for at least
4 hours before initial use.
1. Open the silicone cover protecting the Charging Jack.
2. I nsert the USB cable into the Charging Jack.
3. I nsert the other end of the USB cable into the wall charger or a
computer's USB port.
4. W hile charging, the red LED turns on. When charging is
complete, the red LED will turn off.
Replacement Mic sponges*
Wall charger plug
USB adapter cable
Velcro Pads
Glue plate