Fujitsu ETERNUS CS800 S6 User Manual page 63

Figure 37: Controller Module
LED name
IDENTIFY/SCU
READY
DI
(OUT)LINK/
FAULT
READY/FAULT green The link between the DI (OUT) port and the destination port has
ETERNUS CS800
LED Description
status
blinks Specifies the installation location of the controller module.
l
green
System Capacitor Unit (SCU) is charging.
l
green The link between the DI (OUT) port and the destination port has
been established.
amber The link between the DI (OUT) port and the destination port is in
l
error status.
The ports to remove the mini SAS HD cables between enclosures
l
from are indicated. This occurs while a drive enclosure is being
added.
blinks The ports to connect the cables are indicated. This occurs while a
amber drive enclosure is being added.
been established.
blinks An error has occurred during startup.
green
amber The controller is performing the initial setup after the power is
turned on.
blinks
amber The controller is in error status.
3.2 Storage Modules
63