Target Ip Mapping - Fujitsu ETERNUS CS800 S6 User Manual

Figure 171: Edit Remote Credentials
2. Enter information about the remote user:
If you are editing a remote user, you cannot change the User name.
New Password
Confirm New Password
Description
3. Click Apply.
Deleting a Remote User
Delete a remote user if the OST user credentials are no longer needed to authenticate an
LSU for Automatic Image Replication.
To delete a remote user, select the user and click Delete.
You can seleYou can select multiple users to delete at once.ct multiple users to
delete at once.

10.4.5 Target IP Mapping

The Target IP Mapping page allows you to map a target data IP address to route all
network traffic sent to the data IP address to the specified replication IP address instead.
This can be necessary if the target ETERNUS CS800 is configured with different network
interfaces (and therefore different IP addresses) for data and replication traffic (see
"Network" on page
Generally, OST traffic is routed to the data network segment. However, the OST Automatic
Image Replication (AIR) and Concurrent Optimized Duplication features use the replication
network segment to transmit data to the target system. (Optimized duplication can
optionally use the replication channel.) When a data IP address is mapped to a
replication IP address, OST traffic that is sent to one of the IP addresses is routed to the
other IP address as necessary.
ETERNUS CS800
Enter the password for the remote user.
Enter the password again to confirm it.
(Optional) Enter a brief description of the remote
user.
293).
10.4 OST Configuration
247