Tone Settings - Canon CLC5151 Reference Manual

Details of each item are shown below.
[Initial Function]:
[Selected Function]: The display returns to the main screen of the function that was displayed

Tone Settings

You can set whether to sound audible tones. The following tones sound at the following times:
• Entry Tone:
• Invalid Entry Tone:
• Restock Supplies Tone: When the toner cartridge needs to be replaced
• Error Tone:
• Job Done Tone:
1
Press
2
Select [On] or [Off] for the desired tones
The screen specified as the initial function is displayed after the Auto
Clear mode initiates. For example, if you set the System Monitor screen
as the initial screen, and the Auto Clear mode initiates while a settings
screen for the Mail Box function is shown, the display returns to the
System Monitor screen.
before the Auto Clear mode initiated. For example, if you set the System
Monitor screen as the initial screen, and the Auto Clear mode initiates
while a settings screen for the Mail Box function is shown, the display
returns to the Inbox Selection screen of the Mail Box Function.
When pressing keys on the control panel or keys on the touch panel display
When an invalid key on the control panel or touch panel display is pressed, or
when the maximum number of characters allowed is exceeded
When a malfunction occurs (e.g., paper jam or operational error)
After a job completes (e.g., outputting, stapling, or faxing is complete)
[Common Settings] [Audible Tones].
press [OK].
Specifying Common Settings
4
4-29