Default Display After Auto Clear - Canon CLC5151 Reference Manual

4

Default Display after Auto Clear

You can set whether the screen specified as the Initial Function is displayed after the Auto Clear
mode initiates.
NOTE
The time necessary for the Auto Clear mode to initiate can be set. (See "Auto Clear Time," on p. 4-64.)
1
2
4-28
Specifying Common Settings
If you want to set the default System Monitor screen:
Press [Settings] for <Set the Default Screen for System Monitor>.
Select [Copy], [Send], [Fax], [Print], [Receive], or [Device] under <Default Status Type>
select [Status] or [Log] under <Status/Log>.
Press [OK].
Press [Common Settings]
Select [Initial Function] or [Selected Function]
[Auto Clear Setting].
press [OK].