Table of Contents
Advertisement
Power connector cable
NOTE:
The power connector cable (DC power) is included in the
599525-001.
Before removing the power connector cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Switch cover (see
b.
Keyboard (see
c.
DVD-ROM drive (see
d.
Heat sink and fan (see
e.
Speakers (see
f.
Palm rest (see
g.
Solid-state module (see
h.
Display assembly (see
i.
Top cover (see
j.
System board (see
k.
USB connector board and cable (see
Remove the power connector cable.
1.
Position the computer right-side up with the front toward you.
Battery on page
36).
Switch cover on page
Keyboard on page
39)
DVD-ROM drive on page
Heat sink and fan on page
Speakers on page
46)
Palm rest on page
48)
Solid-state module on page
Display assembly on page
Top cover on page
67)
System board on page
Cable Kit on page
37)
43)
57)
50)
62)
71)
USB connector board on page
Component replacement procedures
22, part number
73)
77
Advertisement
Table of Contents
