Table of Contents
Advertisement
Top cover
Description
Top cover
Before removing the top cover, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Switch cover (see
b.
Keyboard (see
c.
Speakers (see
d.
DVD-ROM drive (see
e.
Palm rest (see
Remove the top cover:
1.
Position the computer right-side up with the front toward you.
2.
Remove the 12 slotted T8 2.5×5.0 screws (1) and the 4 PM2.0×3.0 screws (2) that secure the
top cover to the base enclosure.
3.
If installed, remove the ExpressCard slot bezel (1), and remove the tape that attaches the top
cover to the audio jacks.
Battery on page
36).
Switch cover on page
Keyboard on page
39)
Speakers on page
46)
DVD-ROM drive on page
Palm rest on page
48)
37)
43)
Component replacement procedures
Spare part number
599569-001
67
Advertisement
Table of Contents
