Table of Contents
Advertisement
Solid-state module
NOTE:
The solid-state module spare part kit includes a solid-state module bracket.
Description
2-GB
4-GB
8-GB
Before removing the solid-state module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Switch cover (see
b.
Keyboard (see
c.
Palm rest (see
Remove the solid-state module:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two PM2.0×2.5 screws (1) and loosen the PM2.5×10.0 captive screw (2) that
secures the solid-state module to the computer.
3.
Grasp the Mylar tab on the solid-state module and slide the solid-state module (3) to the right to
disconnect it from the system board.
50
Chapter 4 Removal and replacement procedures
Battery on page
36).
Switch cover on page
Keyboard on page
39)
Palm rest on page
48)
37)
Spare part number
614527-001
614528-001
634653-001
Advertisement
Table of Contents
