Chapter 5 Operation And Status; Operation; Status Screen - NETGEAR MR814V2 User Manual

Chapter 5
Operation and Status
This Chapter details the operation of the Wireless Router and the status
screens.

Operation

Once both the Wireless Router and the PCs are configured, operation is automatic.
However, there are some situations where additional Internet configuration may be required:
•
If using Internet-based Communication Applications , it may be necessary to specify
which PC receives an incoming connection. Refer to Chapter 6 - Advanced Features for
further details.
•
Applications which use non-standard connections or port numbers may be blocked by the
Wireless Router's built -in firewall. You can define such applications as Special Applic a-
tions to allow them to function normally. Refer to Chapter 6 - Advanced Features for
further details.
•
Some non-standard applications may require use of the DMZ feature. Refer to Chapter 6 -
Advanced Fe atures for further details.

Status Screen

Use the Status link on the main menu to view this screen.
Figure 23: Status Screen
5
35
Wireless Router User Guide
Data - Status Screen
Internet
Conne ction Method This indicates the current connection method, as set in the Setup
Wizard.
Broadband Modem This shows the connection status of the modem.
Internet Connection Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address This IP Address is allocated by the ISP (Internet Service Provider).
"Connection De tails" Click this button to open a sub-window and view a detailed
Button description of the current connection. Depending on the type of
connection, a "log" may also be available.
LAN
IP Address The IP Address of the Wireless Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function - either "En-
abled" or "Disabled".
For additional information about the PCs on your LAN, and the IP
addresses allocated to them, use the PC Database option on the
Advanced menu.
System
Device Name This displays the current name of the Wireless Router.
Firmware Version The current version of the firmware installed in the Wireless
Router.
"System Data" Clicking this button will open a Window which lists all system
Button details and settings.
Buttons
Conne ction Details View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
System Data Display all system information in a sub-window.
Refresh Screen Update the data displayed on screen.
36