Analog Input - GE 750 Instruction Manual

750/760
Feeder Management Relay
PHASE A
CURRENT
LAST RESET

Analog Input

ANALOG INPUT
6–14
demand time interval, the maximum demand since the last maximum demand
reset, and the time and date stamp of this maximum demand value. Maximum
demand quantities can be reset to zero with the
setpoint command.
CLEAR MAX DEMAND DATA
b) PHASE A CURRENT
TO
PATH: ACTUAL VALUES A2 METERING
[ ] LAST PHASE A CURRENT
DEMAND:
MAX PHASE A CURRENT
MESSAGE
DEMAND:
LAST PHASE A CURRENT
MESSAGE
DATE: Mar 16 1997
LAST PHASE A CURRENT
MESSAGE
TIME: 16:30:00
The actual values for Phase A Current Demand are shown above. The actual values
displays for Phase B Current, Phase C Current, Real Power, Reactive Power, and
Apparent Power Demand are similar to those above.
c) LAST RESET DATE
PATH: ACTUAL VALUES A2 METERING
[ ] DEMAND DATA LAST
RESET: Mar 16 1997
This message displays the last date the maximum demand data was cleared. If the
date has never been programmed, this relay will display "Unavailable".
PATH: ACTUAL VALUES A2 METERING
[ ] ANALOG INPUT:
ANALOG INPUT:
MESSAGE
ANALOG INPUT:
MESSAGE
The relay provides the ability to monitor any external quantity via an auxiliary
current input called the analog input.
These first actual value message displays the scaled value of the analog input, as
defined in
S6 MONITORING
values display, the name programmed in setpoint message
ANALOG INPUT ANALOG INPUT SETUP
factory default "A/I". The name of the units programmed in the setpoint message
MONITORING ANALOG INPUT
instead of the factory default "µA".
The subsequent actual value messages display the analog input rate of change in
per minutes and per hour.
http://www.GEmultilin.com
S1 RELAY SETUP
APPARENT POWER DEMAND
DEMAND PHASE A CURRENT(APPARENT PWR)
Range: 0 to 65535 A
0 A
Range: 0 to 65535 A
0 A
Range: Date in format shown
Range: Time in format shown
DEMAND LAST RESET DATE
Range: Date in format shown
ANALOG INPUT
Range: 0 to 65535
0 μA
Range: 0 to 65535
0 μA
/min
Range: 0 to 65535
0 μA
/hour
ANALOG INPUT ANALOG INPUT SETUP
will be displayed instead of the
A/I NAME
ANALOG INPUT SETUP
A2 Metering
CLEAR DATA
. In this actual
S6 MONITORING
S6
will be displayed
A/I UNITS
GE Multilin