Manual Close Blocking - GE 750 Instruction Manual

750/760
Feeder Management Relay

Manual Close Blocking

MANUAL CLOSE
5–102
PATH: SETPOINTS S7 CONTROL
[ ] MANUAL CLOSE
FUNCTION: Disabled
MANUAL CLOSE
MESSAGE
RELAYS (3-7): -----
MANUAL CLOSE BLOCK
MESSAGE
TIME:
PHASE INST OC 1
MESSAGE
BLOCKING: Disabled
NEUTRAL INST OC 1
MESSAGE
BLOCKING: Disabled
GND INST OC
MESSAGE
BLOCKING: Disabled
SENSTV GND INST OC
MESSAGE
BLOCKING: Disabled
NEG SEQ INST OC
MESSAGE
BLOCKING: Disabled
PHASE TIME OC 1
MESSAGE
RAISED PICKUP:
NEUTRAL TIME OC 1
MESSAGE
RAISED PICKUP:
GND TIME OC
MESSAGE
RAISED PICKUP:
SENSTV GND TIME OC
MESSAGE
RAISED PICKUP:
NEG SEQ TIME OC
MESSAGE
RAISED PICKUP:
SELECT SETPOINT
MESSAGE
GROUP: Active Group
The 750/760 can be programmed to block instantaneous overcurrent elements and
raise the pickup level of time overcurrent elements when a manual breaker close is
performed. This prevents optimally set overcurrent elements from erroneously
operating on startup due to inrush currents.
http://www.GEmultilin.com
MANUAL CLOSE
Range: Disabled,
Alarm, Control
Range: Any combination of 3 to 7
Auxiliary relays
Range: 1 to 1000 s in steps of 1
5 s
Range: Disabled, Enabled
Range: Disabled, Enabled
Range: Disabled, Enabled
Range: Disabled, Enabled
Range: Disabled, Enabled
Range: 0 to 100% in steps of 1
0%
Range: 0 to 100% in steps of 1
0%
Range: 0 to 100% in steps of 1
0%
Range: 0 to 100% in steps of 1
0%
Range: 0 to 100% in steps of 1
0%
Range: Group 1, Group 2, Group 3,
Group 4, Active Group
S7 Control
Alarm, Latched
GE Multilin