Details Of Simulation - Sharp MX-C250 Service Manual

3. Details of simulation

1
1-1
Operation test/check
Purpose
Function (Purpose) Used to check the operation of the scanner
(reading) unit and the control circuit.
Scanner (reading)
Section
Operation/Procedure
1) Select the operation speed with 10 keys. .
2) Press [[OK]/[START] key.
Scanning is once performed at the speed corresponding to the
scan resolution (operation speed).
Item No. Display
1 MONO300
2 MONO400
3 MONO600
OC SCAN
4 COLOR300
5 COLOR400
6 COLOR600
1-2
Operation test/check
Purpose
Function (Purpose) Used to check the sensors in the scanner
(reading) section and the related circuits.
Scanner (reading)
Section
Operation/Procedure
The operating status of the sensor is displayed.
When "MHPS" is highlighted, the scanner unit is in the home posi-
tion.
2
2-1
Operation test/check
Purpose
Function (Purpose) Used to check the operations of the auto
document feed unit and the control circuit.
RSPF
Section
Operation/Procedure
1) Select the operation mode and the speed with 10keys. .
2) Press [OK]/[START] key.
The RSPF repeats paper feed, transport, and paper exit oper-
ations at the speed corresponding to the scan resolution (oper-
ation speed).
When [STOP] key is pressed, the operation is terminated.
Item No. Display
1 MONO300S Monochrome 300DPI Single
2 MONO600S Monochrome 600DPI Single
SSPF
3 COLOR300S Color 300DPI Single
4 COLOR600S Color 600DPI Single
1 MONO300S Monochrome 300DPI Single
2 MONO600S Monochrome 600DPI Single
RSPF
3 COLOR300S Color 300DPI Single
4 COLOR600S Color 600DPI Single
5 MONO300D Monochrome 300DPI duplex
6 MONO600D Monochrome 600DPI duplex
7 COLOR300D Color 300DPI duplex
8 COLOR600D Color 600DPI duplex
Default
Operation mode
value
300DPI(112.0mm/s)
400DPI(84.0mm/s)
600DPI(56.0mm/s)
300DPI(56.0mm/s)
400DPI(42.0mm/s)
600DPI(28.0mm/s)
Default
Operation mode
value
MX-C250 SIMULATION 6 – 7
2-2
Operation test/check
Purpose
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in the document
feed unit section and the control circuits.
SSPF/RSPF
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
SSPF
Sensor name Contents
SPPD1 RSPF transport detector 1
SPED RSPF document empty detector
RSPF
Sensor name Contents
SPPD1 RSPF transport detector 1
SPPD2 RSPF transport detector 2
SPED RSPF document empty detector
SCOV RSPF cover open/close detector
2-3
Operation test/check
Purpose
Function (Purpose) Used to check the operations of the loads
in the auto document feed unit and the con-
trol circuit.
RSPF
Section
Operation/Procedure
1) Select a target item of the operation check with 10 keys.
2) Press [OK]/[START] key.
The selected load performs the operation.
When [STOP] key is pressed, the operation is terminated.
SSPF
SPFM SPF transport motor
RSPF
SPFM_F RSPF transport motor (normal rotation)
SPFM_R RSPF transport motor (reverse rotation)
SPUS RSPF paper feed roller solenoid
SRVC Reverse clutch