Disassembly And Assembly Of Each Unit - Sharp MX-C250 Service Manual

1 '13/Aug 2 '13/Oct
O. Drive unit
1 Main drive unit
1) Remove the MFPC unit and the HV PWB.
2) Disconnect the connector, harnesses and clamps of the main
drive unit.
3) Remove the main drive unit. .
Parts
MX-C250 DISASSEMBLY AND ASSEMBLY 10 – 16

2.Disassembly and assembly of each unit

A. Operation panel unit
No.
1 LCD PWB
2 KEY-LED PWB
3 LCD
(1) LCD PWB
1) Remove the KEY FFC.
Regarding the connection part (A), remove the FFC by referring
the following procedure.
Lifting up the lock lever as the OK state shown in the figure. It is
necessary to remove the FFC with releasing the lock of the con-
nector.
Name
1
2