K. Rollers - Sharp MX-C250 Service Manual

K.Rollers
No. Name
1 Paper exit roller (Drive)
2 Paper exit roller (Idle)
3 Transport roller 4 (Drive)
4 Transport roller 4 (Idle)
5 Transport roller 5 (Drive)
6 Transport roller 5 (Idle)
7 Registration roller (Drive)
8 Registration roller (Idle)
9 Paper Feed Roller
10 Fuser heat roller
11 Fusing pressure roller
12 Paper Feed Roller
13 Separation roller
Separation roller (Paper feed
14
tray 1)
Drives the roller in the paper exit section.
Apply a pressure to paper and the paper exit roller to provide the transport power of the Paper pressure (idle) roller to paper.
Transports paper from the transport roller to the transport roller 5.
Apply a pressure to paper and the transport roller to provide the transport power of the Paper pressure (idle) roller to paper.
Lower duplex drive transport roller which transports paper to the registration rollers.
Transports paper to the Pressure (idle) Transport Roller. Paper is buckled between the Pressure (idle) Transport Roller and this
roller to correct the paper skew and the relation between images and paper.
Registration Drive Roller that controls the transport timing of paper and adjusts the relative position between images on the
Transfer Belt and the registered paper.
Transports paper to the transfer section. / Controls the transport timing of paper and adjusts relative relations between the image
and paper.
Feeds paper from the cassette to the Registration rollers.
Applies heat through the roller to the toner on the paper to fuse the toner into the paper.
Flexible silicone-rubber pressure fusing roller.
Feeds paper to the paper transport section.
Apply the pressure to the paper feed roller in reverse direction and prevents the paper
from feeding it in layered condition.
Apply the pressure to the paper feed roller in reverse direction and prevents the paper
from feeding it in layered condition.
MX-C250 EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 12
2
1
9
8
14
Function/Operation
3
4
11
10
5
12
13
7 6