User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim spt-threshold 1000
ipv6 pim ssm
Use the ipv6 pim ssm command to administratively configure PIM Source
Specific Multicast (SSM) range of addresses for IPv6 multicast routing. Use
the no form of this command to removed configured ranges of addresses from
the router.
Syntax
ipv6 pim ssm { default |
no ipv6 pim ssm { default |
Parameter Description
Parameter
default
group-address
group-mask
Default Configuration
There are no group addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
group-address group-mask
group-address group-mask
Description
Defines the SSM range access list to 232/8.
An IPv6 multicast group address.
An IPv6 mask in /prefix form.
}
}
IPv6 PIM Commands
999