Snmpv3 Target Parameters Table Configuration; Snmpv3 Notify Table Configuration - NEC N8406-023 Command Reference Manual

SNMPv3 Target Parameters Table configuration

You can configure the target parameters entry and store it in the target parameters table in the SNMP engine. This
table contains parameters that are used to generate a message. The parameters include the message processing
model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name,
and the security level (noAuthnoPriv, authNoPriv, or authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration commands.
Table 91 SNMPv3 Target Parameters Table Configuration commands
Command
snmp-server target-parameters
<1-16> name <1-32 characters>
snmp-server target-parameters
<1-16> message
{snmpv1|snmpv2c|snmpv3}
snmp-server target-parameters
<1-16> security
{usm|snmpv1|snmpv2}
snmp-server target-parameters
<1-16> user-name <1-32
characters>
snmp-server target-parameters
<1-16> level {noAuthNo-
Priv|authNoPriv|authPriv}
no snmp-server target-
parameters <1-16>
show snmp-server v3 target-
parameters

SNMPv3 Notify Table configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular
events or conditions, and generates Notification-Class messages based on these events or conditions.
The following table describes the SNMPv3 Notify Table Configuration commands.
Table 92 SNMPv3 Notify Table Configuration commands
Command
snmp-server notify <1-16>
name <1-32 characters>
snmp-server notify <1-16>
tag <1-255 characters>
no snmp-server notify <1-
16>
show snmp-server v3
notify
Description
Configures the locally arbitrary, but unique identifier that is associated
with this entry.
Command mode: Global configuration
Configures the message processing model that is used to generate
SNMP messages.
Command mode: Global configuration
Selects the security model to be used when generating the SNMP
messages.
Command mode: Global configuration
Defines the name that identifies the user in the USM table, on whose
behalf the SNMP messages are generated using this entry.
Command mode: Global configuration
Selects the level of security to be used when generating the SNMP
messages using this entry. The level
SNMP message will be sent without authentication and without using a
privacy protocol. The level
sage will be sent with authentication but without using a privacy protocol.
authPriv
The means that the SNMP message will be sent both with
authentication and using a privacy protocol.
Command mode: Global configuration
targetParamsTable
Deletes the
Command mode: Global configuration
targetParamsTable
Displays the current
Command mode: All
Description
Defines a locally arbitrary but unique identifier associated with this SNMP notify
entry.
Command mode: Global configuration
Defines a tag of 255 characters maximum that contains a tag value which is
used to select entries in the Target Address Table. Any entry in the
snmpTargetAddrTable
, that matches the value of this tag, is selected.
Command mode: Global configuration
Deletes the notify table entry.
Command mode: Global configuration
Displays the current notify table configuration.
Command mode: All
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 95
noAuthNoPriv
means that the
authNoPriv
means that the SNMP mes-
entry.
configuration.