Acl Information; Rmon Information; Rmon History Information - NEC N8406-023 Command Reference Manual

ACL information

The following table describes the commands used to display information about Access Control Lists and Groups.
Table 39 ACL information commands
Command
show access-control
list <1-762>
show access-control
group <1-762>
show access-control
The following command displays Access Control List information:
show access-control
Command mode: All
Current ACL information:
------------------------
Filter 1 profile:
Ethernet
- VID
Actions
Filter 2 profile:
Ethernet
- VID
Actions
No ACL groups configured.
ACL information provides configuration parameters for each Access Control List. It also shows which ACLs are
included in each ACL Group.

RMON Information

The following command displays general RMON information:
show rmon
Command mode: All

RMON history information

The following command displays RMON history information:
show rmon history
Command mode: All
RMON History group configuration:
Index
-----
1
2
3
4
5
Usage
Displays information about the selected ACL.
Command mode: All except User EXEC
Displays information about ACL Groups.
Command mode: All except User EXEC
Displays information about all ACLs.
Command mode: All
: 1/0xfff
: Set COS to 0
: 1/0xfff
: Permit
IFOID
------------------------------
1.3.6.1.2.1.2.2.1.1.24
1.3.6.1.2.1.2.2.1.1.24
1.3.6.1.2.1.2.2.1.1.18
1.3.6.1.2.1.2.2.1.1.19
1.3.6.1.2.1.2.2.1.1.24
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 48
Interval Rbnum Gbnum
-------- ----- -----
30 5
30 5
30 5
30 5
1800 5
5
5
5
5
5