1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 1013
  6. Installation manual

Cisco ASR 1013 Installation Manual

Hide thumbs Also See for ASR 1013:
Table of Contents

Advertisement

Quick Links

Cisco ASR 1013 Router Overview and Installation
This chapter describes the Cisco ASR 1013 Router and provides the procedures for installing the Cisco ASR
1013 Router in equipment racks and hardware upgrade process.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Cisco ASR 1013 Router Description

The Cisco ASR 1013 Router supports full-width card modules. It is designed with a single midplane with
connectors on one interface midplane. The Cisco ASR 1013 Router supports:
• Up to 6 ASR1000-SIP40G shared port adapter modules
• Up to 24 shared port adapters (SPAs) and up to six SIPs
Cisco ASR 1000 Series Router Hardware Installation Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 1013

Summary of Contents for Cisco ASR 1013

  • Page 1: Table Of Contents

    Cisco ASR 1013 Router Overview and Installation This chapter describes the Cisco ASR 1013 Router and provides the procedures for installing the Cisco ASR 1013 Router in equipment racks and hardware upgrade process. This chapter contains the following sections: •...
  • Page 2 Cisco ASR 1013 Router Overview and Installation Cisco ASR 1013 Router Description • Two embedded services processors (Cisco ASR1000-ESP40, Cisco ASR1000-ESP100, or Cisco ASR1000-ESP200) • Cisco ASR1000-RP2 route processor • Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies and two power supply zones.

  • Page 3: Front View

    Cisco ASR 1013 Router Overview and Installation Front View Front View The following image shows the Cisco ASR 1013 Router with modules and filler plates installed. Figure 1: Cisco ASR 1013 Router — Front View Cisco ASR 1000 Series Router Hardware Installation Guide...
  • Page 4 Cisco ASR 1013 Router Overview and Installation Front View ASR 1000 Series SIP slot ASR 1000 Series SIP slot ASR 1000 Series SIP slot Slot R0 with ASR 1000- ASR 1000 Series SIP slot Slot F0 with Cisco ASR 1000-ESP40, Cisco ASR...

  • Page 5: Rear View

    Cisco ASR 1013 Router Overview and Installation Rear View Rear View The following image shows the rear of the Cisco ASR 1013 Router with the AC power supplies installed. Figure 2: Cisco ASR 1013 Router — Rear View Cable-management AC power supply in slot...
  • Page 6 The power supply bays are numbered from bottom to top: 0, 1, 2, and 3 respectively. The Cisco ASR 1013 Router has two power zones: • Power zone 1(top half of chassis) includes slots: ◦...

  • Page 7: Installation Methods

    The Cisco ASR 1013 Router is designed with each slot numbered as shown in the “Cisco ASR 1013 Router—Rear View” figure in the Rear View section. Cisco ASR 1013 slots are keyed using rotated guide pins for the plug-in card to be fully inserted in slots Note where they are intended to operate.

  • Page 8: General Rack Installation Guidelines

    • T he Cisco ASR 1013 Router overall height is 22.75 inches (57.8 cm). You can install three Cisco ASR 1013 routers in a 42RU equipment rack; but must allow at least one to two inches (2.54 cm to 5.08 cm) of vertical clearance between the router and any equipment above or below it.

  • Page 9: Guidelines For Equipment Rack Installation

    When installing the Cisco ASR 1013 Router, consider the following items: • The Cisco ASR 1013 Router requires at least 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (the front and top/rear sides of the chassis).

  • Page 10: Attaching The Rear Rack-Mount Brackets

    • Have the cable-management bracket (used in four places on the Cisco ASR 1013 chassis: upper half, lower half, and left and right sides) available if you plan to install it on the front of the chassis.
  • Page 11 (see the following image, callout number 4). Figure 4: Location of the Rear Rack-Mount Brackets on the Cisco ASR 1013 Router Cisco ASR 1000 Series Router Hardware Installation Guide...

  • Page 12: Rack-Mounting The Cisco Asr 1013 Router

    What to Do Next This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1013 Router. Rack-Mounting the Cisco ASR 1013 Router The Cisco ASR 1013 Router comes installed with front forward rack-mount brackets. The rear rack-mount brackets are optional and are shipped in the accessory kit along with a set of front rack-mount brackets.
  • Page 13 You can perform one of the following procedures to install the chassis in a rack: Installing the Chassis Using the Forward Rack-Mount Brackets Before you mount the ASR 1013 Router in a rack, make certain you read which rack-mount bracket ear Caution holes to use when positioning the chassis in the rack.
  • Page 14 The following image shows the forward rack-mount brackets, callout number 2 and the rear rack-mount brackets, callout number 4, on the Cisco ASR 1013 Router. Figure 6: Forward Rack-Mount Brackets on the Cisco ASR 1013 Router Forward rack-mount Rear rack-mount bracket...
  • Page 15 See the next sections on the types of racks you can use to install the chassis. Step 3 (Optional) Install a shelf in the rack to support the Cisco ASR 1013 Router. If you use a shelf, this will help support the chassis while you secure it to the rack.
  • Page 16 See the next sections on the types of racks you can use to install the chassis. Step 3 (Optional) Install a shelf in the rack to support the Cisco ASR 1013 Router. If you use a shelf, this will help support the chassis while you secure it to the rack.
  • Page 17 Four-Post Rack Installation, on page Two-Post Rack Installation The Cisco ASR 1013 Router can be installed on a two-post 19-inch equipment rack. The following image shows the Cisco ASR 1013 Router installed on a two-post rack. Figure 7: Installing the Cisco ASR 1013 Router on a Two-Post Rack...
  • Page 18 If you are using a two-post rack secure the rack to the floor surface to prevent tipping and avoid bodily injury and component damage. To install the Cisco ASR 1013 chassis on a two-post equipment rack, with the forward rack-mount brackets, follow these steps: SUMMARY STEPS 1.
  • Page 19 Because the Cisco ASR 1013 chassis is very heavy, it is recommended that the chassis be installed at the Note bottom of the rack if you are planning to install more than one Cisco ASR 1013 chassis in the same rack. Cisco ASR 1000 Series Router Hardware Installation Guide...
  • Page 20 Cisco ASR 1013 Router Overview and Installation Four-Post Rack Installation The following image shows the Cisco ASR 1013 Router installed on a four-post rack. Figure 8: Installing the Cisco ASR 1013 Router on a Four-Post Rack Four-post equipment rack Cisco ASR 1013 front...
  • Page 21 Step 1 (Optional) Install a shelf in the rack to support the Cisco ASR 1013 Router. If you are using a shelf then raise the chassis to the level of the shelf. Let the bottom of the chassis rest on the brackets, but continue to support the chassis.Using two people, lift the chassis into the rack using the side handles and grasping underneath the power supply bays.

  • Page 22: Attaching The Cable-Management Bracket

    DETAILED STEPS Step 1 Align the cable-management bracket to the rack-mount bracket on the top of each side of the Cisco ASR 1013 Router. The cable-management bracket aligns to the top hole of the chassis rack-mount bracket. Step 2 Using a Phillips screwdriver, insert the screw through cable-management bracket and into the chassis rack-mount and tighten the screw.
  • Page 23 Cisco ASR 1013 Router Overview and Installation Attaching the Cable-Management Bracket The following image shows the cable-management brackets attached to the chassis in a rack. Figure 9: Cable-Management Brackets Installed on the Cisco ASR 1013 Router Cable-management bracket Chassis front rack-mount...

  • Page 24: Attaching A Chassis Ground Connection

    This completes the procedure for installing the cable-management brackets on the chassis. Attaching a Chassis Ground Connection Connecting the Cisco ASR 1013 Router chassis to ground is required for all DC powered installations and any AC powered installation where compliance with Telcordia grounding requirements is necessary.
  • Page 25 4. Attach the grounding lug with the wire so that the grounding wire does not overlap the power supply. 5. Locate the chassis ground connector on the bottom rear of the Cisco ASR 1013 chassis. 6. Insert the two screws through the holes in the grounding lug as shown in...
  • Page 26 Cisco ASR 1013 Router Overview and Installation Recommended Tools and Supplies The following image shows how to attach the ground lug on the Cisco ASR 1013 Router. Figure 10: Attaching the Cisco ASR 1013 Router Ground Connection Chassis ground studs and...

  • Page 27: Connecting The Shared Port Adapter Cables

    Connecting the Shared Port Adapter Cables The instructions for connecting the cables for the shared port adapter installed in the Cisco ASR 1013 Router are contained in the respective configuration documents for each port adapter. For example, if you are...
  • Page 28 LINK LED AUX connector The Cisco ASR 1013 Router uses RJ-45 ports for both the auxiliary port and the console port. Both the console and the auxiliary ports are asynchronous serial ports; any devices connected to these ports must be capable of asynchronous transmission.

  • Page 29: Connecting Power To The Cisco Asr 1013 Router

    Connecting the Ethernet Management Port When using the Fast Ethernet Management port (“Cisco ASR 1000 Series Route Processor Faceplate Connectors” figure in the Connecting the Console and Auxiliary Port Cables section, callout 4) in the default mode (speed-auto and duplex-auto) the port operates in auto-MDI/MDI-X mode.
  • Page 30 This section provides information about the Cisco ASR 1013 power supply input requirements and power cable options. The DC power supply for the Cisco ASR 1013, ASR 1006, ASR 1004, and ASR 1002 routers operate at individual specifications. The following table shows the common input ranges and circuit breaker requirements.
  • Page 31 In the event of a single fan failure, the remaining fans are sufficient to cool the entire chassis although fan speed may have to be increased. The Cisco ASR 1013 Router system is configured in a dual zone 1+1 power supply configuration. For ASR 1013 router power consumption specifications, see the “Cisco ASR 1013 Router Specifications”...
  • Page 32 For additional AC power cable strain relief, secure the cable to the power supply handle by inserting a nylon cable tie through the hole in the handle and around the cable. The following image shows the Cisco ASR 1013 Router AC power supply. Figure 13: Cisco ASR 1013 Router AC Power Supply...
  • Page 33 Shielded cables must be used to connect to the DB-25 alarm connector on both the AC and DC power Note supplies, in order to comply with FCC/EN55022/CISPR22 Class A emissions requirements. Before you begin to install the DC power supply into the Cisco ASR 1013 Router, read these important notices: Cisco ASR 1000 Series Router Hardware Installation Guide...
  • Page 34 (–) labels on the power distribution unit. • A ground cable is required for each DC PDU. We recommend that you use at least 6-AWG multistrand copper wire. This wire is not available from Cisco Systems; it is available from any commercial cable vendor.
  • Page 35 8. Use tie wraps to secure the wires, so that the wires are not pulled from the terminal block by casual contact. Ti-wrap studs are located below the power supply terminal block (see the “Cisco ASR 1000 Series Route Processor Console Port Connectors” figure in the Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port section).
  • Page 36 Cisco ASR 1013 Router Overview and Installation Connecting DC Input Power to Cisco ASR 1013 Router b) Tighten the Kepnut screws on the power supply studs. Figure 16: Cisco ASR 1013 Router DC Power Supply Grounding Stud and Cable DC power supply Flat washer...
  • Page 37 Use tie wraps to secure the wires, so that the wires are not pulled from the terminal block by casual contact. Ti-wrap studs are located below the power supply terminal block (see the “Cisco ASR 1000 Series Route Processor Console Port Connectors”...

  • Page 38: Connecting A Terminal To The Cisco Asr 1000 Series Rp Console Port

    39, callout 5. You can connect this port to most types of video terminals through use of the console cable kit that is included with your Cisco ASR 1013 Router. The console cable kit contains: • One RJ-45 to RJ-45 crossover cable •...

  • Page 39: Connecting The System Cables

    Figure 18: Cisco ASR 1000 Series Route Processor Console Port Connectors SUMMARY STEPS 1. Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco ASR1000-RP2 route processor. 2. Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable to the RJ-45 adapter, 3.

  • Page 40: Attaching Cable Retention Bracket On Ac Power Supply

    Cisco ASR 1013 Router Overview and Installation Attaching Cable Retention Bracket on AC Power Supply • To reduce the chance of interference, avoid crossing high-power lines with any interface cables. • Verify all cabling limitations (particularly distance) before powering on the system.
  • Page 41 Cisco ASR 1013 Router Overview and Installation Attaching Cable Retention Bracket on AC Power Supply DETAILED STEPS Step 1 Remove the two M3X5mm screws and discard. Step 2 Install AC cord retainer by inserting tabs into lance features on panel.
  • Page 42 Cisco ASR 1013 Router Overview and Installation Attaching Cable Retention Bracket on AC Power Supply Cisco ASR 1000 Series Router Hardware Installation Guide...

Table of Contents