Install The Fan Cage Assembly - Lenovo ThinkSystem SR850 Maintenance Manual

Step 2. Lift the fan cage assembly from the server.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the fan cage assembly

Use this procedure to install the fan cage assembly.
Before installing the fan cage assembly:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 51).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
• http://list.youku.com/albumlist/show/id_50483449
To install the fan cage assembly, complete the following steps:
Step 1. Align the fan cage assembly to the slots on both sides of the server, and lower it into the server.
Figure 50. Fan cage assembly installation
Step 2. Rotate the fan cage release latches down until they stop.
After installing the fan cage assembly, complete the following steps:
1. Reinstall the top cover (see "Install the top cover" on page 131).
2. Reconnect the power cords and any cables that you removed.
3. Install the server in the rack.
4. Power on the server and any peripheral devices.
.
Chapter 3 Hardware replacement procedures
63