Table of Contents
Advertisement
GRAPHICAL CONTROL PANEL
Date and time
Security access
3–16
4.
The first character of the alphanumeric setting value will be marked with a flashing
cursor (underline).
5.
Use the up, down, left, right, shift, and space soft-keys to change the indicated
character.
6.
Use the left and right arrow soft-keys to select and change more characters.
7.
Press the ENTER key when complete to exit the edit sequence. The changes are
automatically saved.
The entry process for date and time follows the same convention as numeric setpoints,
where the day, month, year, hour, minute and second are entered as separate fields. Input
verification is performed for all fields of the setpoint when the ENTER key is pressed. As
these are standard formats, the minimum, maximum and step value displays are removed.
A format string of DD/MM/YYYY or HH:MM:SS is included as a part of the setpoint label for
reference when entering a new value.
There are three levels of security access allowing write access to setpoints, lockout reset,
and firmware download. When there are no pop-ups present, a sustained press on the ESC
key clears the security passcode. When operations are performed that require a higher
level of security, a passcode entry dialog box automatically opens (for example, in
entering factory page at read only security access).
Figure 3-19: Password entry dialog box
The encrypted key information appears only when the current security access level is 0.
MM200 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: CONTROL PANEL
Advertisement
Table of Contents
