Operating "13Ps; Connecting A Convertible - Maytag DW-2 User Manual

Table of Contents

Advertisement

Operating
Tips .......................................................
Starting The Dishwasher
Adding a Forgotten Item
[]
After loading the dishwasher and adding detergent,
For best cleaning, the forgotten item should be added
set the control knob to the desired cycle and press
early in the cycle.
the appropriate option button(s).
[]
Unlatch the door.
[]
Run the water from the hot water tap to clear the
_
Wait for the water circulation to stop.
line of cold water before starting. Connect convert-
Open the door and add the item.
ible models to the faucet (See below).
I_1
[]
Press the door until it latches. The cycle will begin
[]
Close
and
latch the door.
with a drain prior to fill
[]
The cycle resumes automatically.
] Note Water heating and dry options can be used separately or together.
[
[
!
ooooolooooooeooooooo
ooeoooeoooooeoooeoooooe
coo
*eoooe
Indicator Lights
Delay Start glows when this option is selected. The
-_ Clean (certain models) glows at the end of the dry
light stays on until the start of the cycle,
cycle and remains lit until the control knob has been
On (certain models) glows when any cycle on the con-
manually advanced to OFF.
trol knob (including delay start and dry) is on. This light
_-- Heating Delay glows to indicate that the cycle is
will go off when the control knob reaches OFF.
being extended to heat water to the proper temperature.
The location of the _ symbol around the knob corre-
sponds to the heating delay portions of the cycle.
eooeae
oollweo
ooeolboeeoeleoolm.oo
BOegeum
oeeoooeooeoleoee
Connecting a Convertible
I
Turn on the faucet at the sink until hot water comes
out. Turn off the faucet.
]
Pull the connector from the recess in the back of the
dishwasher as shown.
[]
Press down on the thumb release and lift the
con-
nector
onto the faucet.
]
from the thumb release and
Remove pressure
tug
slightly on the connector to be sure it is securely in
place.
n_'_ Turn the hot
full force.
water
on
D
Check that the sink drain is open so water from the
dishwasher can drain properly.
:''.
I
J
Pull the electrical cord from the
it into
_
recess. Plug
a properly grounded outlet.
::
]
Select the
for the load and
the
proper cycle
start
dishwasher.
Release
Button
Connector
9

Advertisement

Table of Contents
loading

Table of Contents