Panasonic KX-T336 System Reference Manual page 1401

Listing Order
LIST command is used to list all entries in alphabetical order of the
extension names and in ascending order of the speed dial codes.
<Example>
The listing order can be altered by changing the input format.
For instance, in the example above, to list the entries in ascending
order of the speed dial codes, enter :
The specified entries will be displayed as follow :
That is, data is listed in the order of the code or the name which is
not specified by one wild card *.
Listing All Entries
All stored entries may be listed by entering LIST command only.
Up to 14 entries can be displayed on the screen at a time.
For instance, if 30 entries are stored, the first execution of LIST will
display the first 14 entries and the second execution of LIST will
display the second 14 entries and the third execution of LIST will
display the remaining two entries.
When you want to list all the stored entries, enter :
Displayed Message
SPD>LIST */*
No.
102
103
101
SPD>LIST 10*/*
SPD>LIST 10*/*
No.
101
102
103
LIST */*
Displayed Message
Error : Illegal main command
*****
Error : Illegal sub command
*****
Error : Input data do not exist
*****
Error : No data is entered
*****
Total 3 entries
*****
name
Betty
Jack
Smith
name
Smith
Betty
Jack
There is an error in the main command.
There is an error in the sub command.
Entered data does not exist.
No data is stored.
Three entries are listed.
13-C-4
Meaning