Panasonic KX-T336 System Reference Manual page 1279

67.00 DISA/AGC Tone Detection Mode (TDM)
Description
When Tone Detection for DISA/AGC is set to"Yes", the system disconnects
the lines if it detects any tones, regardless of tone type, during a trunk-to-
trunk call (DISA or AGC).
This command is used to select a type of tones which applies to tone detec-
tion for DISA/AGC on a Trunk Group basis.
For example, if "2:cyclic tone only" is selected, the system disconnects the
lines only when it detects cyclic tone during a trunk-to-trunk call (DISA or
AGC).
(Password level : Two or higher)
Input Format
T D M
Mode (SH/AT/BT)
Index Number
Index Number
01 to 16
Input Value for Item Number
Item
Assigning Items
Number
None
Tone Detection Mode
(DISA/AGC)
Conditions
None
Index Number(01-16)
Trunk Group Number
0: all tones (no tone, cyclic tone, continuous tone)
1: no tone or cyclic tone
2: cyclic tone only
(Default = 0)
10-C-130
(70695)
↵
CR
Explanation
Input Value