Panasonic KX-T336 System Reference Manual page 1335

Operation
3. To change the previously
stored data, dial the program
number corresponding to the
desired feature.
• To assign DSS(ICM) feature,
1) Dial "2."
2) Dial ICM number (one or
two digit(s)).
• To assign One Touch Dialing
feature,
1) Dial "3."
2) Dial a telephone number
or a feature number.
• To assign External Feature
Access, dial "5."
• To assign Call Park-System
feature, dial "6."
• To assign Call Park-Station
feature, dial "7."
Result
1) The following message
appears on the display:
M01/P : DSS(ICM)
2) The following message
appears on the display:
<Example>
M01/P : DSS(ICM)11
1) The following message
appears on the display:
M01/P :
2) The following message
appears on the display:
<Example> when entering a
telephone number:
M01/P : 9123456
<Example> when entering a
feature number:
M01/P : 01
• The following message
appears on the display:
M01/P : EXT FEAT
• The following message
appears on the display:
M01/P : PARK SYS
• The following message
appears on the display:
M01/P : PARK ST
12-C-8
Continued
Comment/Note
• If the dialed number does not
exist as an ICM number, alarm
tone sounds.
• If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
• Up to 16 digits can be stored.
• You can enter: 0 to 9, * , #,
Pause, Flash, - (hyphen),
SECRET.
• If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
Continued