Warning Plates On The Turbocharger - ABB A140-H55 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
1 Introduction
1.5

Warning plates on the turbocharger

Warning plates are attached at the following locations:
Figure 3: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as
follows:
Order new warning plates from ABB Turbocharging Service Stations.

Remove any warning plates that have become unreadable.

Clean and degrease the areas designated for the warning plates.

Attach the new warning plates.

Turbochargers supplied to the enginebuilder without insulation must be fitted later with
warning plates to be attached to the insulation. This is the responsibility of the enginebuilder.
© Copyright 2015 ABB. All rights reserved. HZTL4030_EN
Page 8 / 115
Revision C September 2015