Cover Plate Drawing; Table 47 Cover Plate Dimensions [Mm] - ABB A140-H55 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
9 Taking out of operation at short notice
9.5

Cover plate drawing

The cover plate is not included in the ABB Turbo Systems scope of delivery and must be
manufactured by the operating company according to the following drawing.
Material: General structural steel, in compliance with DIN EN 10025-2.
Figure 56: Cover plate drawing
Product B1 B2
± 0.5
A130 65.7 60
A135 79.6 80
A140 98.2 102
Table 47: Cover plate dimensions [mm]
© Copyright 2015 ABB. All rights reserved.
B3 B4 B5
± 0.2
130 11.7 1.4
155 14.2 1.6
190 17.2 2.0
HZTL4030_EN
B6 B7 ØD1
± 0.2
150 35.7 227.7
180 39.6 271.7
220 48.2 332.5
Revision C
Page 104 / 115
ØD2 R1 M
17 ≤ 105 M8
21 ≤ 125 M8
25 ≤ 153 M10
September 2015