Rotating And Fixing The Cartridge Group - ABB A140-H55 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
8 Dismantling and fitting
8.10

Rotating and fixing the cartridge group

Figure 39: Rotating and fixing the cartridge group
1. Remove the lifting gear from the ring nuts.
2. Remove the ring nuts (VRM) and screws from the service support.
3. Insert the service support (90012) into the cartridge group.
4. Fit the nuts.
5. Rotate the cartridge group on the service support (90012).
© Copyright 2015 ABB. All rights reserved. HZTL4030_EN
Page 86 / 115
Revision C September 2015