Ril - Honeywell Dolphin 99EX User Manual

There are two screens: Main and Storage Card.
Main Screen
Storage Card Screen
IPSM—Short for Internal Persistent Storage Manager, this is the on-board Flash
memory that is non-volatile. This memory is non-volatile, data or programs stored in
IPSM are not affected when power is removed or the operating system is upgraded.
Autoinstall programs, for example, are stored in \\IPSM\Honeywell\Autoinstall so that
they are always installed after a operating system upgrade or factory reset. See Hon-
eywell support for more information on how to perform a factory reset.
Storage Card—You can install one memory card in Dolphin terminals (see
a Memory Card
select it in the drop-down list and see capacity and usage statistics for the card.

RIL

The RIL Information screen displays useful statistics for the GSM WAN Voice module (PH8).
To verify whether or not the GSM radio is enabled, check the
Preliminary Draft 1/19/11
on page 3-10). If a storage card is installed in the terminal, you can
This screen displays the usage statistics of the on-board,
volatile RAM memory.
Columns:
Storage = RAM memory used to store programs and program data.
Program = RAM memory used to run programs.
Rows:
Total = Displays the current MB of memory allocated for use.
In use = Displays the total MB of that allocated memory being used.
Free = Displays the total MB of memory available.
This screen displays the current capacity and usage sta-
tistics of the selected memory type: IPSM or Storage
Card.
Select the memory type from the drop-down list. IPSM is
selected by default.
Total storage card memory=
The total MB of memory capacity of IPSM or Storage Card.
In use = The MB currently being used.
Free = The MB that is still available for use.
Note: The IPSM partition is fixed at 128MB and cannot be
increased in size.
Dolphin Wireless Manager
Installing
(see page 8-6).
7 - 15