Remove Programs; Ril - Honeywell Dolphin 60s User Manual

Remove Programs

Remove Programs enables you to remove programs installed on the terminal. Any program (usually CAB
or DLL files) stored in the \\IPSM\Honeywell\Autoinstall folder re-installs after a software upgrade or a
factory reset. If a program is manually removed using the Remove Programs application, the program
does not re-install on a hard or soft reset.
Note: A program (file) does not automatically install if it is added to the \\IPSM\Honeywell\Autoinstall folder and a
hard or soft reset is performed. For information on program installation, see
page 8-11.
For information about the system resets, see
support for more information on how to perform a factory reset.
1. Touch > Settings
2. Select the program you want to remove on the list, and then touch Remove.
3. Touch Yes. Wait while the program is removed.
4. Verify that the program no longer appears in the list.

RIL

The RIL Information screen displays useful statistics for the GSM WWAN Voice module.
7 - 20
Resetting the Terminal
> System > Remove Programs
Installing Additional Software
on page 2-13. See Honeywell
.
on