Samsung 710 User Manual page 24
Hide thumbs
Also See for 710:
- Manual de usuario (82 pages) ,
- User manual (80 pages) ,
- Service manual (54 pages)
Advertisement
Setting up a connection with the ARTIK 710 Module can be done in a wired or wireless manner. Here we choose to install
PuTTY a free serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the
following steps:
1.
Open the device manager on the control panel.
2.
When using a PC install the USB to Serial driver. The driver can be found at the following location :
(http://www.ftdichip.com/Drivers/CDM/CDM21218_Setup.zip). For other drivers please visit
(http://www.ftdichip.com/Drivers/D2XX.htm).
3.
Check the COM port number on your PC when you connect the USB serial cable. In our case the COM port allocated
is COM3.
4.
Set the PuTTY configuration as follows:
a.
Set the "Serial line" as the COM port number found in step 3.
b.
Set the COM speed to "115200".
c.
Set the connection type to "Serial".
d.
Save the session under ARTIK-Pro.
5.
Select your saved session and click the "Open" button.
24
Advertisement
