Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Motherboard
  5. SyncMaster 710V
  6. User manual

Samsung 710 User Manual

Hide thumbs Also See for 710:

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for Samsung 710

Summary of Contents for Samsung 710

  • Page 2 Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.

  • Page 3: Table Of Contents

    Preview on the ARTIK IF board ................................21 Configuration of external Power Source ............................22 ARTIK 710 Development Environment Startup ........................ 23 Serial Port Connection ..................................23 Terminal Emulator Installation ................................. 24 Powering up the ARTIK 710 Development Environment ......................... 25 Legal Information ................................. 27...
  • Page 4 Figure 4. Mechanical Drawing ARTIK 710 Platform Board all dimensions are in [mm] ..........9 Figure 5. ARTIK 710 Development Environment Interposer Board Left Top Side, Right Bottom Side ...... 11 Figure 6. ARTIK 710 Development Environment Booting Switch Location ..............12 Figure 7.
  • Page 5 Revision Date Description Maturity October 19, 2016 ARTIK 710 Development Board User Guide Release...
  • Page 6 Environment Temperature Humidity High temperature or humidity deteriorates the characteristics of ARTIK 710 Module, therefore, do not store or use the ARTIK 710 Module under such conditions. Mechanical Shock Do not to apply excessive mechanical shock or force on the ARTIK 710 Module.
  • Page 7 The ARTIK 710 Development Environment consists of 1x Interposer Board , 1x Platform Board, and 1x IF Board. The Interposer Board does include the ARTIK 710 Module. The ARTIK 710 Development Environment is an affordable approach for developing an IoT solution. Figure 1 shows the locations of the various boards that make up the ARTIK 710 Development Environment.
  • Page 8 Figure 2 shows the block diagram of the ARTIK 710 Development Environment, if you want more information on the ARTIK 710 Module please consult the ARTIK 710 Module Datasheet. Figure 3 and Figure 4 show the ARTIK 710 Development Environment Interposer Board and the Platform Board respectively.

  • Page 10: Features

    Wi-Fi or ZigBee . In addition the ARTIK 710 Module has mass storage functionality and its own security solution. Table 1 shows the main features of the ARTIK 710 Module that is part of the ARTIK 710 Development Environment.
  • Page 11 The Interposer Board as depicted in Figure 5 highlights the most important components on the Interposer board.
  • Page 12 This section describes the various boot modes that are supported on the ARTIK 710 Development Environment. Table 2 and Figure 6 show how to manipulate SW4 and where SW4 is located on the Interposer Board to set the various booting options that are available on the ARTIK 710 Development Environment.

  • Page 13: Hdmi 1.4A

    The Interposer board has 1x USB OTG connector located as can be seen in Figure 7. The Interposer board has 1x HDMI 1.4a connector (Micro D-Type) located as can be seen in Figure 8. The following video formats are supported: 480p/480i @59.94Hz/60Hz, 576p/576i@50Hz 720p/720i @50Hz/59.94Hz/60Hz 1080p/1080i @50Hz/59.94Hz/60Hz...

  • Page 14: Lvds

    The Interposer board has 1x LVDS Interface containing 5x data channels and 1x clock channel, its location can be seen in Figure 9. The available maximum resolution is 1920x1080@60fps. The Interposer board has 1x Ethernet Interface, its location can be seen in Figure 10. The Ethernet Interface is based on 802.3az-2010 complying to the Energy Efficient Ethernet (EEE) standard.

  • Page 15: Antenna

    When using Wi-Fi/Bluetooth (same antenna) or ZigBee the included antenna’s need to be attached to the Interposer Board, see also Figure 11. The most important antenna properties are conveyed in Table 3. Antenna Property Dipole Antenna Antenna peak gain +1.43dB (2.4GHz)/+0.91dB (5GHz) Frequency 2.4GHz, 5GHz (for Wi-Fi, BT, ZigBee) Connector type...
  • Page 16 The Platform Board as depicted in Figure 12 highlights the most important components on the platform board.
  • Page 17 5V from the DC Power Adapter, make certain that the battery is compliant! Figure 13 shows the default battery setting and how to switch to DC-5V Adapter. When the ARTIK 710 Development Board is used with an external power...

  • Page 18: Sd-Card Interface

    The Platform board has 1x SD-CARD interface supporting SD3.0 located as can be seen in Figure 14. The Platform board has 1x 4 pin ear jack interface supporting stereo audio as can be seen in Figure 15. The Platform board has 1x MIPI DSI and 1x MIPI CSI interface. The location of the DSI Display interface can be seen in Figure 16.
  • Page 20 The Platform board carries 2x USB 2.0 Interfaces. The location of the USB 2.0 interfaces can be seen in Figure 18. The Platform board has 1x expansion connector that can be seen in Figure 19. This connector enables for expansion possibilities.
  • Page 21 Figure 20 shows the highlights of the connector IF board. In addition Table 4 with J2 and Table 5 with J3 show the pinout of the connectors with its meaning. Pin Name Pin Number Pin Number Pin Name XADC1 XADC2 ADD_XGPIO0 XADC3 ADD_XGPIO1...
  • Page 22 Pin Name Pin Number Pin Number Pin Name XADC0 Pin Name Pin Number Pin Number Pin Name MICOM_GPIO1 MICOM_GPIO2 MICOM_GPIO3 MICOM_GPIO4 MICOM_GPIO5 DC5V MICOM_GPIO6 MICOM_GPIO7 VBAT_MAIN MICOM_GPIO8 MICOM_GPIO9 AP_VDDIO MICOM_GPIO10 MICOM_GPIO11 VDD_EXT1P8_ALIVE MICOM_GPIO12 MICOM_GPIO13 VDD_EXT1P8 MICOM_GPIO14 VDD_EXT3P3_ALIVE VDD_EXT3P3 VDD_EXT5P0_1 Through selection of the Jumpers J20 and J21 you can choose the IO power source (I C, UART, GPIO) or the XAGPIO power source of either, 1.8V, 3.3V or 5V.
  • Page 23 PC and booting up the ARTIK 710 Development Environment. As a first step we will select a serial console to communicate with the ARTIK 710 Module that is located on the ARTIK 710 Development Environment. You can use a typical Linux serial console as depicted in Figure 22, using the serial connector. If your PC does not have a serial port, use the micro-USB B serial cable instead.
  • Page 24 Setting up a connection with the ARTIK 710 Module can be done in a wired or wireless manner. Here we choose to install PuTTY a free serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the following steps: Open the device manager on the control panel.

  • Page 25: Configuration Of External Power Source

    To power up the ARTIK 710 Development Environment you first have to connect the power adapter and the Platform Board as shown in Figure 24. In addition make certain that the jumpers JP1-JP4 located on the Platform Board are set in state 1-2 see...
  • Page 26 Turn on the power switch as shown in Figure 25. Once the power switch is turned on, push the power button (SW2), as depicted in Figure 26, for about 1 second. Once released the booting process will start and you should see booting messages from your console, using the serial connection that you previously established.
  • Page 27 OR OMISSIONS, OR FOR ANY CONSEQUENCES FROM THE USE OF THE DOCUMENTATION CONTAINED HEREIN. Samsung Products are not intended for use in medical, life support, critical care, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.