GE Bently Nevada 1900/27 Operation And Maintenance Manual page 51

Configuration:
Point Plant Name
Location Unit Name
Machine Name : ___________________________________________
Machine Type : ___________________________________________
Transducer Orientation: Radial | Axial
Orientation Zero Degree Reference: ____________________________
Setpoint Alert Setpoint
Levels Danger Setpoint : ___________ in/s | mm/s
Jumper W4 - Trendmaster
Settings W5 - Danger Relay Normally Energized/ De-energized Mode :
W6 - Alert Relay Normally Energized/ De-energized Mode
W7 - Danger Relay Latching/Nonlatching Mode
W8 - Alert Relay Latching/Nonlatching Mode
Configuration Relay Time Delay
Switch Alert Relay Drive
Settings Velocity Units (peak) :
Section 7 - Appendix C - 1900/27 Monitor Configuration Form
1900/27 Vibration Monitor Configuration Form Monitor
: ___________________________________________
: ___________________________________________
: ___________ in/s | mm/s
® 2000 Bypass Mode
: 3 s | 5 s | 10 s | 15 s
:
(This page may be copied)
Angle: ________________
Alert | Alert OR NOT OK | NOT OK | Danger
English - in/s | Metric - mm/s
: IN | OUT
IN | OUT
: IN | OUT
: IN | OUT
: IN | OUT
45