5.2
Examination for Installation Method in Enclosure
Examine the installation location of PLC considering the environmental conditions (Page 30 Generic Specifications).
The PLC can be installed by the following methods.
Keep a space of about 2 mm between the products.
Installing on DIN rail
• The PLC can be installed on a DIN46277 rail (35 mm wide).
• The PLC can be easily moved and removed.
• The PLC installation height is the same as the DIN rail.
For details on the procedures for installing on and detaching from DIN rail, refer to Page 92 Procedures for Installing on
and Detaching from DIN Rail.
■Example of installation
2 mm
FX5U-32MR/ES
FX5-16EX
DIN rail
*1
FX5-CNV-BC
FX5-16EX FX5-40SSC-S
*1
FX5-CNV-BC can only be installed directly.
Installing directly
• The PLC can be installed directly in the enclosure with M4 screws.
For mounting hole pitch, refer to Page 95 Hole pitches for direct mounting.
■Example of installation
2 mm
FX5U-32MR/ES
FX5-16EX
FX5-CNV-BC
FX5-16EX FX5-40SSC-S
FX5-16EYT
Extended extension cable
• FX5-30EC
• FX5-65EC
2 mm
DIN rail
(+ indicates an M4 screw.)
FX5-16EYT
Extended extension cable
• FX5-30EC
• FX5-65EC
2 mm
(+ indicates an M4 screw.)
5.2 Examination for Installation Method in Enclosure
5
5 INSTALLATION
91