Table of Contents
Advertisement
Available languages
Available languages
The installation of more than one appliance
1.
Put down the dimension of the worktop cut out and saw it out.
2.
Put the appliances one at time on some soft surface, a blanket for example, with the
bottom side up.
3.
Put the seal stripe around the lower edge of the appliance along the outer edge of the
glass ceramic.
4.
Put the wok appliance in the worktop cut out. Put the connection bar in the worktop
cut out and push up half of the width against the appliance.
5.
Hook the retaining clips into the protective casing of the wok appliance.
6.
Put the subsequent appliance in the worktop cut out . Make sure that the front ends
of the appliances are on the same level.
7.
Tighten the fixing plate / retaining grip screws.
8.
Seal the gap between the worktop and appliances and between appliances with sili-
cone.
9.
Put some soapy water on the silicon.
DeluxeAppliances - EUappliances.com
+
-
580 mm
360 mm
20 mm
Installation instructions
=
920 mm
27
Advertisement
Table of Contents
