Installation
Note:
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly,
and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can
cause malfunction.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the
vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden
stop, like an emergency stop.
Installing the unit
1. Install the brackets to the bottom of the unit.
The brackets may also be installed vertically.
Screw (3 mm × 6 mm)
2. Install the unit to the vehicle.
60
ENG/MASTER 96
Tapping screw (3 mm × 8 mm)
Car mat or chassis
60
Bracket
Drill a hole of 1.5 mm to 2 mm