Routing The Optical Cable; Setting Example - Pioneer RS-D7R Owner's Manual

Routing the optical cable

Note:
• Try not to bend the optical cable sharply. If it is
necessary to bend it sharply, make sure that the
bending radius is at least 25 mm, otherwise the
cable will not transfer signals properly and so this
unit will not work properly.
• Route the optical cable so that nothing heavy rests
on it, and so that it cannot be stepped on or caught
in anything – for instance, a door.
• Make a loop of diameter at least 200 mm with the
remaining optical cable so that the cable does not
get strained.
• When plugging the optical cable into the unit, use
the supplied cable cramp to prevent the cables
from being bent sharply.
• Route the optical cable so that it does not get
caught in moving parts such as the gear shift, hand
brake, or seat sliding mechanism. Keep the cable
away from hot spots, such as near the heater out-
let.

Setting example

Optical cable
IP-BUS cable
Multi-CD player
(sold separately)
Front Tweeter
7 Using the corrugated tube
• Insert the optical cable into the cor-
RS-D7R—
(sold separately)
RCA Input Amplifier
Front Mid-range
To prevent the optical cable from being
strained, use the corrugated tube after cut-
ting it to the correct length.
rugated tube.
Optical cable
Corrugated tube
RS-P90
Front Woofer
55
Subwoofer
55
ENG/MASTER 96