Adjusting The 31 Band Graphic Equalizer - Pioneer RS-D7R Owner's Manual

Audio Adjustment <Equalizer>
Adjusting the 31 band graphic equalizer <FINE> (Open state)
Adjustable frequency : 20 Hz to 20 kHz (Every 1/3 octaves, total 31 bands)
Level adjustment range: –12 dB to +12 dB (0.5 dB/1 step)
• You can switch between the left/right combine mode and left/right independent mode at
any time. So even when using the left/right independent mode, you can switch to the
left/right combine mode to perform adjustments.
1. Open the cover of the remote
control in the equalizer menu
(refer to page 5).
This switches to equalizer menu
setting screen.
2. Press the FUNCTION button 5 to select the 31-band graphic equalizer
mode.
3. Press the FUNCTION button 1 for two seconds and switch between
left/right independent mode (L/R) and left/right combine mode (COM).
4. Press the FUNCTION button 1 and select left or right channel.
(Only for L/R mode.)
Each press the FUNCTION button 1 switches left and right channel.
Note:
• Even when using the left/right combine mode you can switch to display left and right channels, but
adjustments are those performed in the left/right combine mode.
5. Press the 2/3 buttons and select
the desired band (frequency) to
be adjusted.
6. Press the 5/∞ buttons and
adjust the level.
7. Adjust the other bands.
Repeat steps 5 and 6 to adjust to the desired sound.
8. Switch between right and left to set up the equalizer curve.
Repeat steps 4 to 7 to set up equalizer curves for the left and right speakers separately.
When completing the adjustment
• It is recommended that adjustment settings be stored in memory soon after the adjustments are
completed. Refer to page 42 for memory operations.
24
ENG/MASTER 96
24