Introduction; Manual Accuracy; Contact Info; Functional Overview - Grizzly G2790 Owner's Manual

Manual Accuracy

We are proud to offer this document with your
new machine! We've made every effort to be
exact with the instructions, specifications, draw-
ings, and photographs of the machine we used
when writing this manual. However, sometimes
we still make an occasional mistake.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match
the manual. If you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we post all available docu-
mentation on our website at www.grizzly.com.
Any updates to this document will be reflected on
our website as soon as complete.

Contact Info

We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number and manufacture date from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
-2-

INTRODUCTION

Functional Overview

The Model G2790 is a dry grinder and is not
designed to be used with cutting fluids.
This grinder is designed to sharpen cutting tools
up to 20" long, such as chisels with a straight
edge or jointer/planer knives, that can be securely
mounted in one of the two clamping systems. The
cutting tool can be positioned at angles from 15°
to 90° to the grinding wheel.
Refer to Figures 1–2 for examples of typical
grinding setups.
Figure 1. Example of a grinding setup for a
chisel.
Figure 2. Example of grinding setup for jointer
knife (shown without adjustable guard for clarity).
Model G2790 (Mfd. Since 04/13)