Table of Contents
Advertisement
1. Audio cables from AUDIO OUT Jacks of VCR 1 to
AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
ANT
AUDIO
IN
L
IN
OUT
R
VIDEO
OUT
CH3 CH4
IN
OUT
1
VCR 1 will play your tape. Insert a prerecorded tape in
VCR 1. If the tape does not have a record tab, playback begins. If
this happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the record tab is intact (details are on page five). Make
sure the VCR 2 power is on and VCR 2 is in VCR position. (The
VCR/TV light will appear. If it does not, press the VCR/TV button
once.)
3
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the Number
buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
5
Point the remote control at VCR 2. Use the SPEED but-
ton to select SP or SLP.
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
7
To stop recording, press the STOP/EJECT button on VCR
2 once, then stop the tape on VCR 1.
VCR 2 - Recording VCR
2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2
Rerecording (Tape Duplication) 33
AUDIO
L
IN
OUT
R
VIDEO
IN
OUT
• If you use the AUDIO and VIDEO
IN jacks on the back of VCR 2,
press Number buttons 0, 0, 1. L1
will appear on the screen.
• If you use the AUDIO and VIDEO
IN jacks on the front of VCR 2,
press Number buttons 0, 0, 2. L2
will appear on the screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copy guard pro-
tection, it may not record clearly.
• Audio and video cables are not sup-
plied.
• The illustration uses two VCRs just
like yours. Different VCRs may oper-
ate differently.
ANT
IN
OUT
CH3 CH4
3. RF coaxial cable
from the OUT jack
of VCR 2 to the
TV'S ANTENNA
IN Jack
Helpful Hints
Advertisement
Table of Contents
