Table of Contents
Advertisement
You may access on-screen status displays by pressing the DISPLAY button repeatedly. On-screen status
displays may include the current time, channel, and other information.
Press the DISPLAY button once. The COUNT on-screen status display will appear for five seconds. After
five seconds, only the real-time counter will appear on the screen. This counter shows you the elapsed
playing time of the tape (from the point at which the real-time counter was set to zero).
Press the DISPLAY button once again. The CLOCK on-screen status display will appear for five seconds.
After five seconds, only the current time will appear on the screen (the clock must be set). (If you are
watching TV, the current channel number and the availability of stereo or second audio will also appear
on the screen.)
Press the DISPLAY button once again. The on-screen status display will disappear.
<OFF mode>
Press the DISPLAY button once.
<COUNT mode>
STOP
SLP
0:12:34
HIFI
Press the DISPLAY button once.
<CLOCK mode>
STOP
5:40 PM
CH 02
STEREO
SAP
SLP
This indicates that HIFI has been selected at the AUDIO
OUT menu (see page 44 for details). If you play non-Hi-
Fi tapes while the VCR is set to HIFI, or if MONO has
been selected at the AUDIO OUT menu, HIFI will not
appear on the status display.
Press the DISPLAY
button once.
On-Screen Status Displays 17
Helpful Hints
• If the channel you select has no
broadcast, the screen will be solid
blue.
• You may bring up a status display
at any time by pressing the DIS-
PLAY button. The exceptions are
during Still mode, slow motion play-
back, and forward and reverse
searching.
• Channel numbers (when tuned)
appear on the screen for a few
seconds.
Advertisement
Table of Contents
