Gb Qsfp+ Transceiver Specifications - Cisco Nexus 7702 Hardware Installation Manual

100-Gb QSFP+ Transceiver Specifications

For the cable specifications that apply to these transceivers, see the following table.
Transceiver
CP AK-100G-LR4
CP AK-100G-SR10
For the environmental specifications, see the following table.
Parameter
Storage temperature
Operating temperature
Storage relative humidity
Operating relative humidity
100-Gb QSFP+ Transceiver Specifications
Note The 100-Gigabit QSFP+ transceivers are used with the M3-Series 100-Gigabit I/O module
(N77-M312CQ-26L). This I/O module supports Forward Error Correction (FEC) with the 100-Gigabit
QSFP+ transceivers. For more information, refer
For the cable specifications that apply to these transceivers, see the following table.
Transceiver Cable Type
QSFP-100G-SR4-S MMF
QSFP-100G-LR4-S SMF
QSFP-100G-CWDM4-S SMF
Cisco Nexus 7702 Hardware Installation Guide
86
Cable Connector Wavelength
Type Type (nm)
SMF LC 1310
Duplex
MMF 24-fiber 850
MPO/MTP
Specification
–40 to 158°F (–40 to 70°C)
32 to 104°F (0 to 40°C)
5 to 95 percent, noncondensing
5 to 90 percent, noncondensing
Connector Type Wavelength
(nm)
12-fiber MPO 850
LC Duplex 1295, 1300,
1304, 1309
LC Duplex 1271, 1291,
1311, 1331
Core Size Modal
(microns) Bandwidth
(MHz-km)
G.652 —
50.0 2000 (OM3)
50.0 4700 (OM4)
FEC Support on Optic Modules.
Core Size Modal
(microns) Bandwidth
(MHz-km)
50.0 2000 (OM3)
50.0 4700 (OM4)
G.652 —
G.652 —
Switch Specifications
Maximum Cable
Distance
6.21 miles (10 km)
328 feet (100 m)
492 feet (150 m)
Maximum Cable
Distance
230 feet (70 m) over
OM3 Multimode Fiber
328 feet (100 m) over
OM4 Multimode Fiber
6.21 miles (10 km)
1.24 miles (2 km)