Cisco TelePresence MX700 Installation Manual page 23

Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
17
Mount loudspeakers
H
Two loudspeakers are pre-installed. Follow
steps 1-3 for the remaining seven loudspeakers.
Connect the cable that is marked with the
1
correct position to the loudspeaker.
Enter the loudspeaker onto the speaker clip.
2
Make sure the cable is not pinched.
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
The loudspeaker
cables are marked
1
with a number. These
numbers must match
the position of the
loudspeakers, as
shown here.
Cable number 4, above
the right monitor, is not
used.
Fasten with one screw.
3
2
3
4
5
7 × PT4x10, pan
(one for each loudspeaker)
1
2
3
5
Page 23