Cisco TelePresence MX700 Installation Manual page 18

Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
13
Organize pre-mounted cables
Organize the cables that are placed in the channel on top of the monitors. Lead the cables to
the right, and place them as shown in the illustration.
Note that the loudspeaker cable 4 above the right monitor will not be used.
The camera module will be connected in step 15 and the cables will be connected in steps 14,
16 and 17.
2 ×
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
To the left of camera module
Loudspeaker cables
number 3–4 (step 17)
On the right side of monitor
Power over Ethernet
(step 14)
Right
monitor
Camera cables To the right of camera module
HDMI (step 16)
Power (step 16)
4 ×
Ethernet (step 16)
Loudspeaker cable
number 5 (step 17)
HDMI (step 14)
USB, type B (step 14)
Loudspeaker cables
number 1-3, 5 (step 17)
Page 18