Installing Your Tv-Video Combi; Preparation For Use; Decoder Allocation - Philips TV-Video Combi 14PV374/07 Operating Instructions Manual

3. Installing your TV-Video Combi

Preparation for use

Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.
1.
After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
PROG P+
2.
2.
The automatic TV channel search starts.
PLEASE WAIT
START
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will appear
on the TV screen.
3.
3. 'TIME' and 'DATE' will appear on the TV
screen.
4.
4.
Check 'TIME'. If required, please change the
time with the number buttons
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
5.
5.
Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.
6.
When all information is correct, save by
pressing
STATUS/EXIT
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
EN
FINISH
.
0..9
.

Decoder allocation

Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
1.
1.
Use
,
PROG P+
TV channel which you would like to allocate
the decoder to.
2.
2.
Press . The main menu will appear.
MENU
3.
3.
Use
PLAY B-K STOP C-L
SET UP'. Then press
4.
4.
Use
PLAY B-K STOP C-L
TUNING'. Then press
5.
5.
Use
PLAY B-K STOP C-L
'DECODER'.
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6. Use
FWD 1- B
(Decoder switched on).
How can I switch off the decoder?
Use to select 'OFF' (Decoder
FWD 1- B
switched off).
7.
7.
To end, press
The decoder has now been allocated to this TV
channel.
6
or to select the
0..9
PROG P–
to select 'TUNER
.
FWD 1- B
to select 'MANUAL
.
FWD 1- B
to select
P55
055
[OFF]
[OFF]
to select 'ON'
.
STATUS/EXIT